Gravure-News

par **machinman** » 05 Avr 2006 1:15

Salut, je vous remercie par avance pour toute l'aide que vous pourriez m'apporter.

Mon graveur pioneer DVR-109BK (firmware 1.58) est un peu patraque, un peu beaucoup même...
J'utilise des dvd-r de bonne qualité, des ritek G-05 et jusqu'à récemment, je n'avais jamais eu de problèmes avec.
Très franchement, je doute qu'ils soient en cause, j'achète les dvd en grosse quantité et j'ai testé avec plusieurs dvd différents de différentes piles de dvd sans amélioration...

Je vous décris le problème, je lance donc la gravure d'un disque de données avec nero 7.0.5.4 ( avec une ancienne version de nero c'est pareil, avec alcohol120% pour des images dvd c'est pareil) a une vitesse de 8x comme certifié pour les dvd-r que j'utilise (j'ai déjà réussi à en graver en 12x, donc y doivent pas être trop mauvais hein, bon.)ça stoppe directement à 3%, là selon son humeur le disque va se relancer plusieurs fois (on l'entend tourner très fort dans le lecteur...) soit continuer à tourner à un rythme régulier... Et au bout d'une dizaine de minutes, il va finalement me dire que la gravure a échoué.

Je peux déjà vous dire que ce matin j'ai desossé la bête et j'ai nettoyé la lentille avec un peu de produit à vitres... Ca n'a pas empiré la situation visiblement ce qui est déjà pas mal, mais ça n'a nullement arrangé le bin's...

Est-ce que quelqu'un aurait déjà rencontré ce problème, même avec un autre type de graveur ?

J'attends vos réponses avec impatience.
Merci.

par **Scaramanga** » 05 Avr 2006 4:59

Salut et bienvenue sur le forum de Gravure-News,
Vérifie déjà que le le mode DMA soit bien activé pour tes périphériques IDE.

par **machinman** » 05 Avr 2006 5:46

Salut à toi.
Merci pour cette première réponse et le chaleureux accueil.
Oui, je suis bien DMA. Je suis même en ultra DMA 4 - ultra66. Mais je vois qu'une option est cochée, celle laissant au bios le dernier mot pour ce qui est du choix du type de transfert. (hum, je devrais peut-être faire un tour dans le bios...)
N'hésitez pas à me demander toute information qui pourrait vous être utile dans la résolution de ce problème.

par **Scaramanga** » 05 Avr 2006 5:51

Peux tu nous coler le fichier log de nero ?

Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.
En ce qui concerne Nero7 tu le trouveras dans le répertoire d'installation, C:\Program Files\Nero\Nero 7\Core\NeroHistory.log .
On peut le visualier avec un éditeur de texte , bloc note de windows par exemple. Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log. tu peux le coller entre les balise [ code ] et [ /code ].

par **machinman** » 05 Avr 2006 6:15

Entendu, je vais mettre deux petits logs différents (les trois derniers d'aujourd'hui), un où la gravure marche (j'ai spécifié une vitesse de gravure de 4x) et deux autres où ça plante (6x et 12x).

Là où ça plante.

Code: Tout sélectionner: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.0.5.4 Internal Version: 7, 0, 5, 4 (Nero Express) Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 1 TA 0 - 7.0.5.4 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 3 - 7.0.5.4 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00DUA3 nvatabus Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD2500JB-55EVA0 nvatabus Port 0 ID 1 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-109 nvatabus Port 0 ID 2 DMA: Off CdRomPeripheral : PIONEER DVD-ROM DVD-106 nvatabus Port 0 ID 3 DMA: Off DiskPeripheral : WDC WD360GD-00FLA2 nvatabus Port 1 ID 0 DMA: Off DiskPeripheral : WDC WD2000JD-00HBB0 nvatabus Port 1 ID 2 DMA: Off DiskPeripheral : WDC WD2000JS-98MHB0 nvatabus Port 2 ID 2 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 1 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 2 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 3 DMA: Off === CDRom-Device-Map === SCSIVAX DVD/CD-ROM Q: CDRom3 SCSIVAX DVD/CD-ROM R: CDRom4 SCSIVAX DVD/CD-ROM S: CDRom5 Generic DVD-ROM T: CDRom2 SCSIVAX DVD/CD-ROM U: CDRom6 PIONEER DVD-RW DVR-109 V: CDRom0 PIONEER DVD-ROM DVD-106 W: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096624kB) Free physical memory: 1246MB (1276612kB) Memory in use : 39 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.4.2006 ISO compilation 19:59:03 #1 Text 0 File Isodoc.cpp, Line 6414 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 19:59:04 #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 19:59:04 #3 Text 0 File Reader.cpp, Line 124 Reader running 19:59:04 #4 Text 0 File Writer.cpp, Line 113 Writer V: PIONEER DVD-RW DVR-109 running 19:59:04 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 19:59:04 #6 Text 0 File Burncd.cpp, Line 3341 Turn on Disc-At-Once, using DVD media 19:59:04 #7 Text 0 File DlgWaitCD.cpp, Line 288 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2224687 (494:22.37, 4345MB) 19:59:04 #8 Text 0 File DlgWaitCD.cpp, Line 300 Write in overburning mode: NO (enabled: CD) 19:59:04 #9 Text 0 File DlgWaitCD.cpp, Line 2699 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 19:59:04 #10 Text 0 File DlgWaitCD.cpp, Line 472 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:59:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2224688 (2224688) = #2224688/494:22.38 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2224688 blocks [V: PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 19:59:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [V: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4556161024, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2224688 | lead-out | 1 | 0x41 | 0x00 19:59:04 #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 19:59:04 #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 19:59:04 #15 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 19:59:04 #16 Text 0 File Burncd.cpp, Line 4175 Cache writing successful. 19:59:04 #17 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 19:59:04 #18 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 12x (16620 KB/s) 19:59:04 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 19:59:04 #20 Text 0 File DVDR.cpp, Line 2699 Recording mode: Sequential Recording Mode 19:59:04 #21 Text 0 File DVDR.cpp, Line 2855 Start write address at LBA 0 DVD high compatibility mode: Yes 19:59:04 #22 Text 0 File Cdrdrv.cpp, Line 8663 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:59:08 #23 Text 0 File Cdrdrv.cpp, Line 1210 19:59:08.859 - V: PIONEER DVD-RW DVR-109 : Queue again later 20:01:04 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 290 V: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 0C Buffer x04980000: Len x10000 0x15 47 7B C3 04 09 3E 7B 1C F1 43 23 22 67 5B E8 0xCB 86 67 1E F1 0F 3E 19 DC 34 19 01 0A 09 62 57 0x3C 79 F0 F0 DF 87 8E 78 F0 8F 00 B7 DD 25 46 33 20:01:04 #25 CDR -1135 File Writer.cpp, Line 302 Write error V: PIONEER DVD-RW DVR-109 20:01:04 #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 20:01:04 #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 20:01:05 #28 Text 0 File DVDR.cpp, Line 3095 EndDAO: Last written address was 767 20:01:05 #29 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 12x (16620 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=90240 bytes, created 29/08/2002 01:27:50 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.0.5.4 Internal Version: 7, 0, 5, 4 (Nero Express) Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 1 TA 0 - 7.0.5.4 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 3 - 7.0.5.4 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00DUA3 nvatabus Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD2500JB-55EVA0 nvatabus Port 0 ID 1 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-109 nvatabus Port 0 ID 2 DMA: Off CdRomPeripheral : PIONEER DVD-ROM DVD-106 nvatabus Port 0 ID 3 DMA: Off DiskPeripheral : WDC WD360GD-00FLA2 nvatabus Port 1 ID 0 DMA: Off DiskPeripheral : WDC WD2000JD-00HBB0 nvatabus Port 1 ID 2 DMA: Off DiskPeripheral : WDC WD2000JS-98MHB0 nvatabus Port 2 ID 2 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 1 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 2 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 3 DMA: Off === CDRom-Device-Map === SCSIVAX DVD/CD-ROM Q: CDRom3 SCSIVAX DVD/CD-ROM R: CDRom4 SCSIVAX DVD/CD-ROM S: CDRom5 Generic DVD-ROM T: CDRom2 SCSIVAX DVD/CD-ROM U: CDRom6 PIONEER DVD-RW DVR-109 V: CDRom0 PIONEER DVD-ROM DVD-106 W: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096624kB) Free physical memory: 1324MB (1356576kB) Memory in use : 35 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.4.2006 ISO compilation 20:08:06 #1 Text 0 File Isodoc.cpp, Line 6414 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 20:08:06 #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 20:08:06 #3 Text 0 File Reader.cpp, Line 124 Reader running 20:08:06 #4 Text 0 File Writer.cpp, Line 113 Writer V: PIONEER DVD-RW DVR-109 running 20:08:06 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 20:08:06 #6 Text 0 File Burncd.cpp, Line 3341 Turn on Disc-At-Once, using DVD media 20:08:07 #7 Text 0 File DlgWaitCD.cpp, Line 288 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2224687 (494:22.37, 4345MB) 20:08:07 #8 Text 0 File DlgWaitCD.cpp, Line 300 Write in overburning mode: NO (enabled: CD) 20:08:07 #9 Text 0 File DlgWaitCD.cpp, Line 2699 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 20:08:07 #10 Text 0 File DlgWaitCD.cpp, Line 472 >>> Protocol of DlgWaitCD activities: <<< ========================================= 20:08:07 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2224688 (2224688) = #2224688/494:22.38 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2224688 blocks [V: PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 20:08:07 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [V: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4556161024, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2224688 | lead-out | 1 | 0x41 | 0x00 20:08:07 #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 20:08:07 #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 20:08:07 #15 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 20:08:07 #16 Text 0 File Burncd.cpp, Line 4175 Cache writing successful. 20:08:07 #17 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 20:08:07 #18 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 6x (8310 KB/s) 20:08:07 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 20:08:07 #20 Text 0 File DVDR.cpp, Line 2699 Recording mode: Sequential Recording Mode 20:08:07 #21 Text 0 File DVDR.cpp, Line 2855 Start write address at LBA 0 DVD high compatibility mode: Yes 20:08:07 #22 Text 0 File Cdrdrv.cpp, Line 8663 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 20:08:09 #23 Text 0 File Cdrdrv.cpp, Line 1210 20:08:09.015 - V: PIONEER DVD-RW DVR-109 : Queue again later 20:10:42 #24 Text 0 File Cdrdrv.cpp, Line 1210 20:10:42.828 - V: PIONEER DVD-RW DVR-109 : Queue again later 20:20:42 #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 20:20:43 #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 20:20:43 #27 Text 0 File DVDR.cpp, Line 3095 EndDAO: Last written address was 2047 20:20:45 #28 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 6x (8310 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=90240 bytes, created 29/08/2002 01:27:50 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Là, ça marche.

Code: Tout sélectionner: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.0.5.4 Internal Version: 7, 0, 5, 4 (Nero Express) Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 1 TA 0 - 7.0.5.4 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 3 - 7.0.5.4 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00DUA3 nvatabus Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD2500JB-55EVA0 nvatabus Port 0 ID 1 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-109 nvatabus Port 0 ID 2 DMA: Off CdRomPeripheral : PIONEER DVD-ROM DVD-106 nvatabus Port 0 ID 3 DMA: Off DiskPeripheral : WDC WD360GD-00FLA2 nvatabus Port 1 ID 0 DMA: Off DiskPeripheral : WDC WD2000JD-00HBB0 nvatabus Port 1 ID 2 DMA: Off DiskPeripheral : WDC WD2000JS-98MHB0 nvatabus Port 2 ID 2 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 1 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 2 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 3 DMA: Off === CDRom-Device-Map === SCSIVAX DVD/CD-ROM Q: CDRom3 SCSIVAX DVD/CD-ROM R: CDRom4 SCSIVAX DVD/CD-ROM S: CDRom5 Generic DVD-ROM T: CDRom2 SCSIVAX DVD/CD-ROM U: CDRom6 PIONEER DVD-RW DVR-109 V: CDRom0 PIONEER DVD-ROM DVD-106 W: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096624kB) Free physical memory: 1431MB (1465708kB) Memory in use : 30 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.4.2006 ISO compilation 01:24:25 #1 Text 0 File Isodoc.cpp, Line 6414 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 01:24:26 #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 01:24:26 #3 Text 0 File Reader.cpp, Line 124 Reader running 01:24:26 #4 Text 0 File Writer.cpp, Line 113 Writer V: PIONEER DVD-RW DVR-109 running 01:24:26 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 01:24:26 #6 Text 0 File Burncd.cpp, Line 3341 Turn on Disc-At-Once, using DVD media 01:24:26 #7 Text 0 File DlgWaitCD.cpp, Line 288 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2224687 (494:22.37, 4345MB) 01:24:26 #8 Text 0 File DlgWaitCD.cpp, Line 300 Write in overburning mode: NO (enabled: CD) 01:24:26 #9 Text 0 File DlgWaitCD.cpp, Line 2699 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 01:24:26 #10 Text 0 File DlgWaitCD.cpp, Line 472 >>> Protocol of DlgWaitCD activities: <<< ========================================= 01:24:26 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2224688 (2224688) = #2224688/494:22.38 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2224688 blocks [V: PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 01:24:26 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [V: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4556161024, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2224688 | lead-out | 1 | 0x41 | 0x00 01:24:26 #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 01:24:26 #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 01:24:26 #15 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 01:24:26 #16 Text 0 File Burncd.cpp, Line 4175 Cache writing successful. 01:24:26 #17 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 01:24:26 #18 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5540 KB/s) 01:24:26 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 01:24:26 #20 Text 0 File DVDR.cpp, Line 2699 Recording mode: Sequential Recording Mode 01:24:26 #21 Text 0 File DVDR.cpp, Line 2855 Start write address at LBA 0 DVD high compatibility mode: Yes 01:24:26 #22 Text 0 File Cdrdrv.cpp, Line 8663 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 01:24:28 #23 Text 0 File Cdrdrv.cpp, Line 1210 01:24:28.156 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:24:59 #24 Text 0 File Cdrdrv.cpp, Line 1210 01:24:59.984 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:00 #25 Text 0 File Cdrdrv.cpp, Line 1210 01:25:00.453 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:00 #26 Text 0 File Cdrdrv.cpp, Line 1210 01:25:00.843 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:01 #27 Text 0 File Cdrdrv.cpp, Line 1210 01:25:01.031 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:01 #28 Text 0 File Cdrdrv.cpp, Line 1210 01:25:01.046 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:01 #29 Text 0 File Cdrdrv.cpp, Line 1210 01:25:01.062 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:01 #30 Text 0 File Cdrdrv.cpp, Line 1210 01:25:01.078 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:01 #31 Text 0 File Cdrdrv.cpp, Line 1210 01:25:01.078 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:02 #32 Text 0 File Cdrdrv.cpp, Line 1210 01:25:02.531 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:02 #33 Text 0 File Cdrdrv.cpp, Line 1210 01:25:02.859 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:02 #34 Text 0 File Cdrdrv.cpp, Line 1210 01:25:02.953 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:02 #35 Text 0 File Cdrdrv.cpp, Line 1210 01:25:02.968 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:02 #36 Text 0 File Cdrdrv.cpp, Line 1210 01:25:02.984 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #37 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.000 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #38 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.000 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #39 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.031 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #40 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.031 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #41 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.046 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #42 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.062 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #43 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.078 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #44 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.093 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #45 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.109 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #46 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.109 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #47 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.125 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #48 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.140 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #49 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.156 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:03 #50 Text 0 File Cdrdrv.cpp, Line 1210 01:25:03.171 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:06 #51 Text 0 File Cdrdrv.cpp, Line 1210 01:25:06.156 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:16 #52 Text 0 File Cdrdrv.cpp, Line 1210 01:25:16.546 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:16 #53 Text 0 File Cdrdrv.cpp, Line 1210 01:25:16.625 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:16 #54 Text 0 File Cdrdrv.cpp, Line 1210 01:25:16.640 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:19 #55 Text 0 File Cdrdrv.cpp, Line 1210 01:25:19.609 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:19 #56 Text 0 File Cdrdrv.cpp, Line 1210 01:25:19.609 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:23 #57 Text 0 File Cdrdrv.cpp, Line 1210 01:25:23.187 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:23 #58 Text 0 File Cdrdrv.cpp, Line 1210 01:25:23.828 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:24 #59 Text 0 File Cdrdrv.cpp, Line 1210 01:25:24.625 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:24 #60 Text 0 File Cdrdrv.cpp, Line 1210 01:25:24.625 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:24 #61 Text 0 File Cdrdrv.cpp, Line 1210 01:25:24.718 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:25 #62 Text 0 File Cdrdrv.cpp, Line 1210 01:25:25.000 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:26 #63 Text 0 File Cdrdrv.cpp, Line 1210 01:25:26.796 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:27 #64 Text 0 File Cdrdrv.cpp, Line 1210 01:25:27.687 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:27 #65 Text 0 File Cdrdrv.cpp, Line 1210 01:25:27.968 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:31 #66 Text 0 File Cdrdrv.cpp, Line 1210 01:25:31.171 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:35 #67 Text 0 File Cdrdrv.cpp, Line 1210 01:25:35.140 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:40 #68 Text 0 File Cdrdrv.cpp, Line 1210 01:25:40.484 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:40 #69 Text 0 File Cdrdrv.cpp, Line 1210 01:25:40.484 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:49 #70 Text 0 File Cdrdrv.cpp, Line 1210 01:25:49.484 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:49 #71 Text 0 File Cdrdrv.cpp, Line 1210 01:25:49.484 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:58 #72 Text 0 File Cdrdrv.cpp, Line 1210 01:25:58.984 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:59 #73 Text 0 File Cdrdrv.cpp, Line 1210 01:25:59.015 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:25:59 #74 Text 0 File Cdrdrv.cpp, Line 1210 01:25:59.078 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:00 #75 Text 0 File Cdrdrv.cpp, Line 1210 01:26:00.562 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:01 #76 Text 0 File Cdrdrv.cpp, Line 1210 01:26:01.203 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:06 #77 Text 0 File Cdrdrv.cpp, Line 1210 01:26:06.859 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:06 #78 Text 0 File Cdrdrv.cpp, Line 1210 01:26:06.859 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:10 #79 Text 0 File Cdrdrv.cpp, Line 1210 01:26:10.015 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:10 #80 Text 0 File Cdrdrv.cpp, Line 1210 01:26:10.437 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:11 #81 Text 0 File Cdrdrv.cpp, Line 1210 01:26:11.046 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:11 #82 Text 0 File Cdrdrv.cpp, Line 1210 01:26:11.953 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:13 #83 Text 0 File Cdrdrv.cpp, Line 1210 01:26:13.421 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:13 #84 Text 0 File Cdrdrv.cpp, Line 1210 01:26:13.875 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:14 #85 Text 0 File Cdrdrv.cpp, Line 1210 01:26:14.062 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:14 #86 Text 0 File Cdrdrv.cpp, Line 1210 01:26:14.078 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:14 #87 Text 0 File Cdrdrv.cpp, Line 1210 01:26:14.093 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:14 #88 Text 0 File Cdrdrv.cpp, Line 1210 01:26:14.109 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:14 #89 Text 0 File Cdrdrv.cpp, Line 1210 01:26:14.109 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:14 #90 Text 0 File Cdrdrv.cpp, Line 1210 01:26:14.125 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #91 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.031 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #92 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.031 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #93 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.062 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #94 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.078 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #95 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.093 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #96 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.093 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #97 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.109 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #98 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.125 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #99 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.140 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #100 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.156 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #101 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.171 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #102 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.171 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #103 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.187 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:16 #104 Text 0 File Cdrdrv.cpp, Line 1210 01:26:16.203 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:18 #105 Text 0 File Cdrdrv.cpp, Line 1210 01:26:18.171 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:18 #106 Text 0 File Cdrdrv.cpp, Line 1210 01:26:18.250 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:18 #107 Text 0 File Cdrdrv.cpp, Line 1210 01:26:18.265 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:24 #108 Text 0 File Cdrdrv.cpp, Line 1210 01:26:24.187 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:26 #109 Text 0 File Cdrdrv.cpp, Line 1210 01:26:26.031 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:26 #110 Text 0 File Cdrdrv.cpp, Line 1210 01:26:26.531 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:26 #111 Text 0 File Cdrdrv.cpp, Line 1210 01:26:26.562 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:26 #112 Text 0 File Cdrdrv.cpp, Line 1210 01:26:26.593 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:26 #113 Text 0 File Cdrdrv.cpp, Line 1210 01:26:26.859 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:27 #114 Text 0 File Cdrdrv.cpp, Line 1210 01:26:27.156 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:31 #115 Text 0 File Cdrdrv.cpp, Line 1210 01:26:31.843 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:35 #116 Text 0 File Cdrdrv.cpp, Line 1210 01:26:35.437 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:35 #117 Text 0 File Cdrdrv.cpp, Line 1210 01:26:35.453 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:35 #118 Text 0 File Cdrdrv.cpp, Line 1210 01:26:35.546 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:41 #119 Text 0 File Cdrdrv.cpp, Line 1210 01:26:41.234 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:41 #120 Text 0 File Cdrdrv.cpp, Line 1210 01:26:41.234 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:47 #121 Text 0 File Cdrdrv.cpp, Line 1210 01:26:47.218 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:26:59 #122 Text 0 File Cdrdrv.cpp, Line 1210 01:26:59.484 - V: PIONEER DVD-RW DVR-109 : Queue again later 01:38:50 #123 Text 0 File WriterStatus.cpp, Line 116 <V: PIONEER DVD-RW DVR-109> start writing Lead-Out at LBA 2224688 (21F230h), length 0 blocks 01:38:50 #124 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 01:38:50 #125 Text 0 File DVDR.cpp, Line 3095 EndDAO: Last written address was 2224687 01:39:28 #126 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5540 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=90240 bytes, created 29/08/2002 01:27:50 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

J'ai jeté un coup d'oeil, "histoire de", et je vois DMA : Off, étrange ou bien ?
J'espère que c'est une erreur toute bête qui me fait rater les gravures (une erreur qu'on peut corriger...)

par **Scaramanga** » 05 Avr 2006 6:42

Code: Tout sélectionner: DiskPeripheral : WDC WD1200JB-00DUA3 nvatabus Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD2500JB-55EVA0 nvatabus Port 0 ID 1 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-109 nvatabus Port 0 ID 2 DMA: Off CdRomPeripheral : PIONEER DVD-ROM DVD-106 nvatabus Port 0 ID 3 DMA: Off

Le mode DMA ne semble pas activé pour tes périphé&rioque IDE.
A moins que les pilote Nvidia sément le souk...
:arrow:

http://forum.pcstats.com/showthread.php ... post206053

par **machinman** » 05 Avr 2006 6:49

Hum je vois, j'ai récemment mis à jour ma carte mère, et maintenant que j'y pense, ça doit etre la cause de ce bazar, bon, on va désinstaller tout ça.
Je pense que le problème est réglé. Enfin ne vendons pas la peau de l'ours... Je repasse pour donner des nouvelles, merci Scaramanga.

Pas de chance...

Code: Tout sélectionner: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.0.5.4 Internal Version: 7, 0, 5, 4 (Nero Express) Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 1 TA 0 - 7.0.5.4 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 3 - 7.0.5.4 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD2500JB-55EVA0 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD360GD-00FLA2 atapi Port 1 ID 0 DMA: On DiskPeripheral : WDC WD2000JD-00HBB0 atapi Port 2 ID 0 DMA: On DiskPeripheral : WDC WD2000JS-98MHB0 atapi Port 4 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 5 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-ROM DVD-106 atapi Port 5 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 6 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 7 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 7 ID 1 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 7 ID 2 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 7 ID 3 DMA: Off === CDRom-Device-Map === SCSIVAX DVD/CD-ROM Q: CDRom3 SCSIVAX DVD/CD-ROM R: CDRom4 SCSIVAX DVD/CD-ROM S: CDRom5 Generic DVD-ROM T: CDRom2 SCSIVAX DVD/CD-ROM U: CDRom6 PIONEER DVD-RW DVR-109 V: CDRom0 PIONEER DVD-ROM DVD-106 W: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096624kB) Free physical memory: 1260MB (1290484kB) Memory in use : 38 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.4.2006 ISO compilation 07:35:56 #1 Text 0 File Isodoc.cpp, Line 6414 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 07:35:56 #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 07:35:56 #3 Text 0 File Reader.cpp, Line 124 Reader running 07:35:56 #4 Text 0 File Writer.cpp, Line 113 Writer V: PIONEER DVD-RW DVR-109 running 07:35:56 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 07:35:57 #6 Text 0 File Burncd.cpp, Line 3341 Turn on Disc-At-Once, using DVD media 07:35:57 #7 Text 0 File DlgWaitCD.cpp, Line 288 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1815295 (403:23.70, 3545MB) 07:35:57 #8 Text 0 File DlgWaitCD.cpp, Line 300 Write in overburning mode: NO (enabled: CD) 07:35:57 #9 Text 0 File DlgWaitCD.cpp, Line 2699 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 07:35:57 #10 Text 0 File DlgWaitCD.cpp, Line 472 >>> Protocol of DlgWaitCD activities: <<< ========================================= 07:35:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1815296 (1815296) = #1815296/403:23.71 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1815296 blocks [V: PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 07:35:57 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [V: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3717726208, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1815296 | lead-out | 1 | 0x41 | 0x00 07:35:57 #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 07:35:57 #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 07:35:57 #15 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 07:35:57 #16 Text 0 File Burncd.cpp, Line 4175 Cache writing successful. 07:35:57 #17 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 07:35:57 #18 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 12x (16620 KB/s) 07:35:57 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 07:35:57 #20 Text 0 File DVDR.cpp, Line 2699 Recording mode: Sequential Recording Mode 07:35:57 #21 Text 0 File DVDR.cpp, Line 2855 Start write address at LBA 0 DVD high compatibility mode: Yes 07:35:57 #22 Text 0 File Cdrdrv.cpp, Line 8663 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 07:36:04 #23 Text 0 File Cdrdrv.cpp, Line 1210 07:36:04.437 - V: PIONEER DVD-RW DVR-109 : Queue again later 07:38:28 #24 Text 0 File Cdrdrv.cpp, Line 1210 07:38:28.234 - V: PIONEER DVD-RW DVR-109 : Queue again later 07:48:28 #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 07:48:28 #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 07:48:28 #27 Text 0 File DVDR.cpp, Line 3095 EndDAO: Last written address was 2047 07:48:30 #28 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 12x (16620 KB/s)

Une autre idée peut-être ?

par **machinman** » 05 Avr 2006 8:52

On me dit ailleurs que mes dvd-r ritek pourrait en être la cause... il marche un jour et le lendemain ça serait foutu, je reste circonspect face à une telle hypothèse...

par **franz99** » 05 Avr 2006 9:35

machinman a écrit:J'utilise des dvd-r de bonne qualité, des ritek G-05 et jusqu'à récemment, je n'avais jamais eu de problèmes avec.
Très franchement, je doute qu'ils soient en cause, j'achète les dvd en grosse quantité et j'ai testé avec plusieurs dvd différents de différentes piles de dvd sans amélioration...

« Compatibilité ritekG05 avec platine et graveurs Pioneer »
http://forum.gravure-news.com/compatibi ... t21698.htm

Outre ce MID code "Ritek-G05" j'espère que vous n'avez pas aussi la plus mauvaise des marques commençant par Ri.....

par **machinman** » 05 Avr 2006 9:37

Oui franz99, je vous vois venir, j'ai lu l'autre topic, les 04 c'est mieux que les 05 mais bon, ils ont marchés longtemps alors pourquoi maintenant ça foirerait hein ?

Edit : des riteks de chez ritek. je suppose que les pires, ce sont les ridisc ?

par **franz99** » 05 Avr 2006 9:40

En fait je ne sais pas exactement pourquoi la gravure foire.
Une gravure qui s'arrête et des medias qui ne se conservent pas une fois gravés sont effectivement 2 choses différentes ...

Mon expérience est que les graveurs Pioneer sont sensibles à la qualité des médias
et je suppose que les DVD de MID code Ritek-G05
ne sont pas tous fabriqués au même endroit avec la même qualité

machinman a écrit:Edit : des riteks de chez ritek. je suppose que les pires, ce sont les ridisc ?

En ce qui concerne la qualité du MID code Ritek-G05 et des nombreuses marques sous lesquelles on peut les trouver
je ne peux que suggérer d'aller voir ce qu'en disent ces gens ici:
« WARNING, RITEK G05. Data loss »
http://club.cdfreaks.com/showthread.php?t=145871
Et notamment ce qu'on dit Franksoy, chas0039 et uart à ce sujet dès le mois d'août 2005.

Si enfin vous arrivez à m'éclairer sur la qualité des DVD
dans cette « nébuleuse Ri… »
je vous en serai vraiment reconnaissant.

par **machinman** » 05 Avr 2006 10:25

Vous le croirez ou non, mon graveur grave à nouveau. Je sais pas quoi dire... Je ne sais pas exactement ce qui a réglé le problème...
J'aime pas quand ça fait ça...

Au moins j'en aurais appris sur ritek, pour moi c'était presque une référence... Eh oui, faut se mettre à la page des fois. Donc la prochaine fois, je casque et je prends de la qualité.
Je vous remercie tous en tout cas, en espérant que ça dure.

par **franz99** » 05 Avr 2006 10:28

machinman a écrit:Vous le croirez ou non, mon graveur grave à nouveau. Je sais pas quoi dire... Je ne sais pas exactement ce qui a réglé le problème...
. . . . en espérant que ça dure.

Eh oui, graver du Ri... est une loterie à l'issue incertaine !
Et pour les DVD Ridata double couche et des graveurs NEC aussi
voir:
« Quel GRAVEUR choisir pour des DVD double couche Ridata ? »
http://forum.gravure-news.com/quel-grav ... t20700.htm

Gravure-News

Problème de gravure avec pioneer 109BK, 4x au max

Problème de gravure avec pioneer 109BK, 4x au max

Re: Problème de gravure avec pioneer 109BK, 4x au max

Re: Problème de gravure avec pioneer 109BK, 4x au max

Qui est en ligne