Gravure-News

[Nikofrize]

Bonjour,

Je vien ici pour vous faire part de mon probleme de gravure qui m'enquiquine vraiment.

Je me suis offert il y a quelque mois un plextor PX810SA et depuis que j'etait passer a vista il me loupait bcp de gravure donc j'ai changer pour un pioneer 217f qui m'a finalement apporter le meme resultat.

Je suis maintenant re-passer a XP et je me rend compte que le resultat est le meme il va me reussir quelque gravure puis apres elle echoue toutes apres la preface avec un message de nero "disque invalable"

Je tiens a vous preciser que cela peut etre des CD ou DVD mais toujours VERBATIM

Donc en resumer cela ne vien pas de mon graveur ni de mon systeme d'exploitation et j'ai une des derniere version de Nero, en plus il me loupe aussi des gravure avec d'autre logiciel de gravure comme clone CD, Je ne comprend pas pourquoi des fois il grave correctement et d'autre pas.

Je vous laisse un log de nero d'une gravure echoué .




Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.6.100
Internal Version: 9, 0, 6, 100

Recorder: <PIONEER DVD-RW DVR-217F>Version: 1.07 - HA 1 TA 0 - 9.0.6.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <PIONEER DVD-RW DVR-217F>Version: 1.07 - HA 1 TA 0 - 9.0.6.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HDS721616PLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1500ADFD-00NLR5 atapi Port 2 ID 0 DMA: On
DiskPeripheral : ST3250823AS atapi Port 2 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-217F atapi Port 3 ID 0 DMA: On
DiskPeripheral : ST31000528AS atapi Port 4 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-217F H: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.10.2009
Image CD
20:38:32 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

20:38:32 #2 Text 0 File Burncd.cpp, Line 3233
PIONEER DVD-RW DVR-217F
Protection contre les ruptures activés

20:38:33 #3 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using CD-R/RW media

20:38:34 #4 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 257916 ( 57:20.66)

20:38:34 #5 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)

20:38:34 #6 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: PIONEER DVD-RW DVR-217F;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

20:38:34 #7 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:38:34 #8 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 257917 (257917) = #257917/57:18.67
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 257917 blocks [H: PIONEER DVD-RW DVR-217F]
--------------------------------------------------------------

20:38:35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [H: PIONEER DVD-RW DVR-217F] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 528521216, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 257917 | 257917 | 0x00
257917 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

20:38:35 #10 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

20:38:35 #11 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

20:38:35 #12 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

20:38:35 #13 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.

20:38:35 #14 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

20:38:35 #15 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 16x (2 400 Ko/s)

20:38:35 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

20:38:35 #17 Text 0 File MMC.cpp, Line 17849
StartDAO : CD-Text - Off

20:38:35 #18 Text 0 File MMC.cpp, Line 22511
Set BUFE: Buffer underrun protection -> ON

20:38:36 #19 Text 0 File MMC.cpp, Line 18077
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 39 14 43

20:38:36 #20 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

20:39:16 #21 SPTI -1046 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x2A 00 00 00 02 40 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 30 05
Buffer x09f604c0: Len x10000
0x9B 33 09 9B 33 09 9B 33 09 9B 33 08 9B 33 09 9B
0x33 08 9B 33 08 9B 33 08 9B 33 08 9B 33 08 9B 33
0x08 9B 33 07 9B 33 07 9B 33 08 9B 33 07 9B 33 07

20:39:16 #22 CDR -1046 File Writer.cpp, Line 306
Illegal disc
H: PIONEER DVD-RW DVR-217F

20:39:18 #23 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

20:39:18 #24 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 16x (2 400 Ko/s)

20:39:18 #25 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

20:39:20 #26 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

20:39:20 #27 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Si vous avez une solution je vous serai entierement reconnaissant car la je craque.

[Nikofrize]

Voila apres avoir redemarer mon pc, suite a l'installation des ASPI, 2 gravures on reussi et la troisieme ne passe pas je vous laisse encore une fois mon log

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.6.100
Internal Version: 9, 0, 6, 100

Recorder: <PIONEER DVD-RW DVR-217F>Version: 1.07 - HA 1 TA 0 - 9.0.6.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <PIONEER DVD-RW DVR-217F>Version: 1.07 - HA 1 TA 0 - 9.0.6.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HDS721616PLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1500ADFD-00NLR5 atapi Port 2 ID 0 DMA: On
DiskPeripheral : ST3250823AS atapi Port 2 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-217F atapi Port 3 ID 0 DMA: On
DiskPeripheral : ST31000528AS atapi Port 4 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-217F H: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 20 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.10.2009
Image CD
22:28:19 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

22:28:19 #2 Text 0 File Burncd.cpp, Line 3233
PIONEER DVD-RW DVR-217F
Protection contre les ruptures activés

22:28:19 #3 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:19 #4 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:19 #5 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:19 #6 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:19 #7 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:19 #8 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using CD-R/RW media

22:28:19 #9 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:19 #10 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:19 #11 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:20 #12 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:20 #13 SPTI -1196 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 3A 02
Buffer x04bb6dc0: Len x20

22:28:44 #14 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 18699 ( 4:11.24)

22:28:44 #15 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)

22:28:44 #16 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: PIONEER DVD-RW DVR-217F;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

22:28:44 #17 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Inconnu. Medium required by compilation: CD-R/RW.)

22:28:44 #18 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 18700 (18700) = #18700/4:9.25
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 18700 blocks [H: PIONEER DVD-RW DVR-217F]
--------------------------------------------------------------

22:28:45 #19 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [H: PIONEER DVD-RW DVR-217F] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 38604800, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 18700 | 18700 | 0x00
18700 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

22:28:45 #20 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

22:28:45 #21 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

22:28:45 #22 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

22:28:45 #23 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.

22:28:45 #24 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

22:28:45 #25 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 16x (2 400 Ko/s)

22:28:45 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

22:28:45 #27 Text 0 File MMC.cpp, Line 17849
StartDAO : CD-Text - Off

22:28:46 #28 Text 0 File MMC.cpp, Line 22511
Set BUFE: Buffer underrun protection -> ON

22:28:46 #29 Text 0 File MMC.cpp, Line 18077
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 04 0b 19

22:28:46 #30 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

22:29:27 #31 SPTI -1046 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x2A 00 00 00 02 00 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 30 05
Buffer x0a430440: Len x10000
0x19 34 E5 25 3B 8F F0 A5 6D 77 E9 73 10 9C E7 3E
0xB1 B2 85 EF 1F 46 5D F2 01 BB 69 BC F8 0C 04 BD
0xBE 7F 4F AD B5 6C AD 28 FD 70 6A 20 4A F3 F6 9D

22:29:27 #32 CDR -1046 File Writer.cpp, Line 306
Illegal disc
H: PIONEER DVD-RW DVR-217F

22:29:29 #33 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

22:29:29 #34 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 16x (2 400 Ko/s)

22:29:29 #35 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

22:29:31 #36 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

22:29:31 #37 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Nikofrize]

Je vien de lancer l'iso via Clone CD sans avoir redemarer le PC et la gravure et passer sans souci, je ne comprend vraiment pas

[Scaramanga]

As tu mis à jour les pilote de ta carte mère ( chipset ) ?

[Nikofrize]

Donc pour les news, j'ai changer le mode SATA dans le BIOS par Compatible (avant il etait sur ehnanced)

Ensuite une gravure Clone CD pas de probleme, et je vien de mettre mon chipset a jour avec inf Intel on verra bien je te tient au courant

En tout les cas je te remercie bcp de ton Aide precieuse

[Nikofrize]

Et bien malheureusement je vien de faire un test de gravure iso sur Nero sur un DVD cette fois

Et il me dit a 1% "adresse de bloc invalide"

voici le log




Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.6.100
Internal Version: 9, 0, 6, 100

Recorder: <PIONEER DVD-RW DVR-217F>Version: 1.07 - HA 1 TA 0 - 9.0.6.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2000kB
Bus Type : default
CD-ROM: <PIONEER DVD-RW DVR-217F>Version: 1.07 - HA 1 TA 0 - 9.0.6.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HDS721616PLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-217F atapi Port 2 ID 0 DMA: On
DiskPeripheral : ST31000528AS atapi Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD1500ADFD-00NLR5 atapi Port 5 ID 0 DMA: On
DiskPeripheral : ST3250823AS atapi Port 5 ID 1 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-217F H: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.10.2009
Graver une image DVD
09:49:20 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

09:49:20 #2 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media

09:49:22 #3 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2218063 (492:54.13, 4332MB)

09:49:22 #4 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)

09:49:22 #5 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: PIONEER DVD-RW DVR-217F, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193

09:49:22 #6 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:49:22 #7 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2218064 (2218064) = #2218064/492:54.14
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2218064 blocks [H: PIONEER DVD-RW DVR-217F]
-- ------------------------------------------------------------

09:49:22 #8 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [H: PIONEER DVD-RW DVR-217F] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4542595072, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2218064 | 2218064 | 0x00
2218064 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

09:49:22 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

09:49:22 #10 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

09:49:22 #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

09:49:22 #12 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.

09:49:22 #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

09:49:22 #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5 540 Ko/s)

09:49:23 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

09:49:23 #16 Text 0 File DVDR.cpp, Line 3259
Recording mode: Sequential Recording Mode

09:49:23 #17 Text 0 File DVDR.cpp, Line 3413
Start write address at LBA 0
DVD high compatibility mode: Yes

09:49:23 #18 SPTI -1066 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x075b4e00: Len x648

09:49:23 #19 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@....R.........
03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00 .MCC.03..RG20...
05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 .............x..
07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................
09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .....x..........
0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 .....g.....:..2.
0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00 ..........$5/)..
0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.)............
11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00 ...........7/)..
13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.)............
15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00 ..........?D=$).
17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 .`./............
19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00 ..........WFB'$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

09:49:23 #20 Text 0 File DVDR.cpp, Line 3551
Reserved Track size: 2218064 (21D850h, 4332MB) -> return code 0

09:49:23 #21 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

09:50:17 #22 SPTI -1064 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
CDB Data: 0x2A 00 00 00 03 60 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 21 02
Buffer x0a880700: Len x10000
0x05 01 02 00 70 00 00 00 86 D9 A8 00 5F 02 00 00
0x00 00 00 00 04 00 00 00 01 00 00 05 00 00 00 00
0x00 00 30 02 FF FF FF FF FF FF FF FF 84 10 00 00

09:50:17 #23 CDR -1064 File Writer.cpp, Line 306
Invalid block address
H: PIONEER DVD-RW DVR-217F

09:50:18 #24 Text 0 File DVDR.cpp, Line 3819
EndDAO: Last written address was 863 (35Fh)

09:50:18 #25 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

09:50:18 #26 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (5 540 Ko/s)

09:50:18 #27 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

09:50:22 #28 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

09:50:22 #29 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



Je test avec clone cd et je vous dit, en tout les cas je confirme que Nero c'est de la me...

[Nikofrize]

A echoué a 1% avec clone CD

Je ne comprend vraiment pas mais j'en ai vraiment marre

[Nikofrize]

Je vien de changer de port Sata pour mon graveur la premiere gravure ok et les autres meme resultat.

[Nikofrize]

Je vien de desactiver mon antivirus "Kaspersky 2009" et la 3 gravure sans probleme, je vous tient au courant