Gravure-News

[daouid]

Bonjour,

depuis quelque temps je constate que j'ai un probleme de garvure sur des DVD +RW
Apres plusieurs gravures ( a partir de la 4 eme je commence a avoir des secteures défectueux voir mauvais rendant trés difficile la lesture de DVD ausi bien sue la platine de salon ou sur l'ordinateur.

Je n 'utilise pourtant que la marque verbatim et Nero 6 sur un graveur Pioneer qui va avoir 3 ans
mon firmware est à jour et je me demande pas si c'est le graveur qui commence à vieillir...et du coup endommage les secteurs...?

Et ce que c'est normale d 'avoir des problemes de DVD defectueux a partir de 4-5 gravures pourtant ne sont ils pas censés durer plus longtemps ? ou ais je un probleme de software ?

merci pour vos éclaircissementsConfiguration: Windows XP
Internet Explorer 7.0
graveur pioneer DVR 109
Nero 6.6.0.18

[Scaramanga]

Salut et bienvenue sur le forum de Gravure-News,
Peux tu nous coller le fichier log de Nero ?

Un log (ou fichier log) se présente sous la forme d'un fichier texte classique, reprenant de façon chronologique, l'ensemble des événements qui ont affecté un système informatique et l'ensemble des actions qui ont résulté de ces événements.

En ce qui concerne Nero tu le trouveras dans le répertoire d'installation, C:Program fileAheadNero, il se nomne NeroHistoryLog . On peut le visualier avec un éditeur de texte , bloc note de windows par exemple.

Attention ce fichier contient le N° de série, pense à le supprimer avant de publier ce fichier log.
tu peux le coller entre les balise [ code ] et [ /code ].

[daouid]

Merci Scaramanga de t'occuper de mon cas je suis actuellement au boulot je regarderais ce que tu me demandes ce soir et je te réponderais aussi tôt !

En attendant j'ai découvert votre site et ce forum sur la gravure et j'ai lu pas mal de chose qui vont m'éclairé sur le principe du gravage...!

[daouid]

Resalut
voici ce que tu m'as demandé:
[code]David RT



Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <PIONEER DVD RW DVR-109> Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD RW DVR-109 >Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD RW DVR-109 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD RW DVR-109 G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1506MB (1542948kB)
Memory in use : 26
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.1.2008
Compilation UDF/ISO
20:05:33 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

20:05:33 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

20:05:33 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:05:33 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

20:05:33 #5 Text 0 File Reader.cpp, Line 127
Reader running

20:05:33 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD RW DVR-109 running

20:05:33 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20:05:34 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20:05:34 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

20:05:40 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

20:05:40 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

20:05:40 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-109, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

20:05:40 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)

20:05:40 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD RW DVR-109]
--------------------------------------------------------------

20:05:40 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

20:05:41 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

20:05:41 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

20:05:41 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

20:05:41 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)

20:05:41 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:05:41 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 23D1EF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............

20:05:41 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

20:05:43 #23 Text 0 File Cdrdrv.cpp, Line 1288
20:05:43.845 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:05:52 #24 Text 0 File Cdrdrv.cpp, Line 1288
20:05:52.876 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:06:08 #25 Text 0 File Cdrdrv.cpp, Line 1288
20:06:08.611 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:19:56 #26 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD RW DVR-109 > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

20:19:57 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:19:59 #28 Text 0 File DVDPlusRW.cpp, Line 883
Media-Format will be stopped after burning

20:19:59 #29 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

20:20:25 #30 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 28/07/2005 17:55:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
David RT

1a22-030k-0350-1550-5697-0951

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <PIONEER DVD RW DVR-109> Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD RW DVR-109 >Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD RW DVR-109 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD RW DVR-109 G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1551MB (1588556kB)
Memory in use : 24
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.1.2008
Compilation UDF/ISO
20:45:50 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

20:45:50 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

20:45:50 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:45:51 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

20:45:51 #5 Text 0 File Reader.cpp, Line 127
Reader running

20:45:51 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD RW DVR-109 running

20:45:51 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20:45:51 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20:45:51 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

20:45:56 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

20:45:56 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

20:45:56 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-109, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

20:45:56 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)

20:45:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD RW DVR-109]
--------------------------------------------------------------

20:45:57 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

20:45:57 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

20:45:57 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

20:45:57 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

20:45:57 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2,4x (3 324 Ko/s)

20:45:58 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:45:58 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............

20:45:58 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

20:45:59 #23 Text 0 File Cdrdrv.cpp, Line 1288
20:45:59.986 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:46:08 #24 Text 0 File Cdrdrv.cpp, Line 1288
20:46:08.579 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

21:09:35 #25 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD RW DVR-109 > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

21:09:35 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:09:37 #27 Text 0 File DVDPlusRW.cpp, Line 883
Media-Format will be stopped after burning

21:09:37 #28 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

21:10:14 #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2,4x (3 324 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 28/07/2005 17:55:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
David RT

1a22-030k-0350-1550-5697-0951

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <PIONEER DVD RW DVR-109> Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD RW DVR-109 >Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD RW DVR-109 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD RW DVR-109 G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1471MB (1506492kB)
Memory in use : 28
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.2.2008
Compilation UDF/ISO
21:28:54 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

21:28:54 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

21:28:54 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

21:28:54 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

21:28:54 #5 Text 0 File Reader.cpp, Line 127
Reader running

21:28:54 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD RW DVR-109 running

21:28:54 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

21:28:54 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

21:28:54 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

21:29:00 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

21:29:00 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

21:29:00 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-109, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

21:29:00 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)

21:29:00 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD RW DVR-109]
--------------------------------------------------------------

21:29:00 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

21:29:01 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

21:29:01 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

21:29:01 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

21:29:01 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2,4x (3 324 Ko/s)

21:29:01 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:29:01 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E20F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............

21:29:01 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

21:29:03 #23 Text 0 File Cdrdrv.cpp, Line 1288
21:29:03.765 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

21:29:12 #24 Text 0 File Cdrdrv.cpp, Line 1288
21:29:12.359 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

21:52:39 #25 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD RW DVR-109 > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

21:52:39 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:52:41 #27 Text 0 File DVDPlusRW.cpp, Line 883
Media-Format will be stopped after burning

21:52:41 #28 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

21:53:19 #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2,4x (3 324 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 28/07/2005 17:55:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
David RT

1a22-030k-0350-1550-5697-0951

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <PIONEER DVD RW DVR-109> Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD RW DVR-109 >Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD RW DVR-109 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD RW DVR-109 G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1632MB (1671936kB)
Memory in use : 20
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.2.2008
Compilation UDF/ISO
19:49:57 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

19:49:57 #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 1189
Required file 'VTS_01_0.VOB' is not present

19:49:57 #3 Phase 115 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation failed

19:49:58 #4 Phase 132 File dlgbrnst.cpp, Line 1832
DVD-Video files compliance ignored

19:49:58 #5 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:49:58 #6 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

19:49:58 #7 Text 0 File Reader.cpp, Line 127
Reader running

19:49:58 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

19:49:58 #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

19:49:58 #10 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

19:50:03 #11 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285647 (507:55.22, 4464MB)

19:50:03 #12 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

19:50:03 #13 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-109, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

19:50:03 #14 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)

19:50:03 #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2285648 (2285648) = #2285648/507:55.23
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285648 blocks [PIONEER DVD RW DVR-109]
--------------------------------------------------------------

19:50:03 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681007104, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285648 | lead-out | 1 | 0x41 | 0x00

19:50:04 #17 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

19:50:04 #18 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

19:50:04 #19 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

19:50:17 #20 Text 0 File Burncd.cpp, Line 1689
User aborts on ExceptionIfFatalError


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 28/07/2005 17:55:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
David RT

1a22-030k-0350-1550-5697-0951

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <PIONEER DVD RW DVR-109> Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD RW DVR-109 >Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD RW DVR-109 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD RW DVR-109 G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1647MB (1687452kB)
Memory in use : 19
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.2.2008
Compilation UDF/ISO
19:52:28 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

19:52:28 #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 1189
Required file 'VTS_01_0.VOB' is not present

19:52:28 #3 Phase 115 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation failed


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 28/07/2005 17:55:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
David RT

1a22-030k-0350-1550-5697-0951

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <PIONEER DVD RW DVR-109> Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD RW DVR-109 >Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD RW DVR-109 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD RW DVR-109 G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1559MB (1597204kB)
Memory in use : 23
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.2.2008
Compilation UDF/ISO
19:55:26 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

19:55:26 #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 1189
Required file 'VTS_01_0.VOB' is not present

19:55:26 #3 Phase 115 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation failed

19:55:33 #4 Phase 132 File dlgbrnst.cpp, Line 1832
DVD-Video files compliance ignored

19:55:33 #5 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

19:55:33 #6 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

19:55:34 #7 Text 0 File Reader.cpp, Line 127
Reader running

19:55:34 #8 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD RW DVR-109 running

19:55:34 #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

19:55:34 #10 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

19:55:34 #11 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

19:55:40 #12 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285647 (507:55.22, 4464MB)

19:55:40 #13 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

19:55:40 #14 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-109, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

19:55:40 #15 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)

19:55:40 #16 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2285648 (2285648) = #2285648/507:55.23
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285648 blocks [PIONEER DVD RW DVR-109]
--------------------------------------------------------------

19:55:40 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681007104, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285648 | lead-out | 1 | 0x41 | 0x00

19:55:41 #18 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

19:55:41 #19 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

19:55:41 #20 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

19:55:51 #21 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2,4x (3 324 Ko/s)

19:55:52 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:55:52 #23 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............

19:55:52 #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

19:55:53 #25 Text 0 File Cdrdrv.cpp, Line 1288
19:55:53.625 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

19:56:02 #26 Text 0 File Cdrdrv.cpp, Line 1288
19:56:02.265 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:19:29 #27 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD RW DVR-109 > start writing Lead-Out at LBA 2285648 (22E050h), lenght 0 blocks

20:19:29 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:19:31 #29 Phase 161 File dlgbrnst.cpp, Line 1832
Burn process completed successfully with warnings


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 28/07/2005 17:55:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
David RT

1a22-030k-0350-1550-5697-0951

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <PIONEER DVD RW DVR-109> Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD RW DVR-109 >Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD RW DVR-109 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD RW DVR-109 G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1530MB (1567480kB)
Memory in use : 25
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.2.2008
Compilation UDF/ISO
19:26:56 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

19:26:56 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

19:26:56 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:26:56 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

19:26:56 #5 Text 0 File Reader.cpp, Line 127
Reader running

19:26:56 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD RW DVR-109 running

19:26:56 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

19:26:56 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

19:26:56 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

19:27:02 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2014655 (447:42.05, 3934MB)

19:27:02 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

19:27:02 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-109, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

19:27:02 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-R DL; DVD+R DL.)

19:27:02 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2014656 (2014656) = #2014656/447:42.6
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2014656 blocks [PIONEER DVD RW DVR-109]
--------------------------------------------------------------

19:27:02 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4126015488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2014656 | lead-out | 1 | 0x41 | 0x00

19:27:04 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

19:27:05 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

19:27:05 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

19:27:05 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2,4x (3 324 Ko/s)

19:27:05 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:27:05 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............

19:27:05 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

19:27:07 #23 Text 0 File Cdrdrv.cpp, Line 1288
19:27:07.062 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

19:27:15 #24 Text 0 File Cdrdrv.cpp, Line 1288
19:27:15.593 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

19:47:55 #25 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD RW DVR-109 > start writing Lead-Out at LBA 2014656 (1EBDC0h), lenght 0 blocks

19:47:55 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:47:57 #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2,4x (3 324 Ko/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 28/07/2005 17:55:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
David RT

1a22-030k-0350-1550-5697-0951

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <PIONEER DVD RW DVR-109> Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD RW DVR-109 >Version: 1.57 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD RW DVR-109 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD RW DVR-109 G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1557MB (1594396kB)
Memory in use : 23
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.2.2008
Compilation UDF/ISO
20:15:38 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

20:15:38 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

20:15:38 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:15:38 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

20:15:38 #5 Text 0 File Reader.cpp, Line 127
Reader running

20:15:38 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD RW DVR-109 running

20:15:38 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20:15:38 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20:15:38 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

20:15:38 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

20:15:38 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

20:15:38 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD RW DVR-109, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

20:15:38 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:15:38 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVD RW DVR-109]
--------------------------------------------------------------

20:15:38 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

20:15:41 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

20:15:41 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

20:15:41 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

20:15:41 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11 080 Ko/s)

20:15:42 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:15:42 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

20:15:42 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

20:15:44 #23 Text 0 File Cdrdrv.cpp, Line 1288
20:15:44.296 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:06 #24 Text 0 File Cdrdrv.cpp, Line 1288
20:16:06.609 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:06 #25 Text 0 File Cdrdrv.cpp, Line 1288
20:16:06.656 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:06 #26 Text 0 File Cdrdrv.cpp, Line 1288
20:16:06.703 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:06 #27 Text 0 File Cdrdrv.cpp, Line 1288
20:16:06.750 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:06 #28 Text 0 File Cdrdrv.cpp, Line 1288
20:16:06.796 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:06 #29 Text 0 File Cdrdrv.cpp, Line 1288
20:16:06.843 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:06 #30 Text 0 File Cdrdrv.cpp, Line 1288
20:16:06.984 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:07 #31 Text 0 File Cdrdrv.cpp, Line 1288
20:16:07.031 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:07 #32 Text 0 File Cdrdrv.cpp, Line 1288
20:16:07.078 - PIONEER DVD RW DVR-109\H0 T0 : Queue again later

20:16:07 #33 Text 0 File Cdrdrv.cpp, Line 1288
20:16:07.125 - PIONEER DVD RW DVR-109\H0

[daouid]

desole j ai fait une fausse manip je ne comprend pas pourquoi mon log ne s 'affiche pas en entier j'ai pourtant fait comme tu m'as dit !!

merci

[daouid]

Scaramanga est ce que tu m'as oublié ?

[daouid]

Il y a quelqu'un sur le forum ?

[Burnitall]

Ton log semble sain à première vue, par contre je n'ai pas tout saisi, tu dis que après 4 ou 5 gravures tu rencontres des soucis, peut-tu être plus explicite stp...

> 4 ou 5 gravures consécutives sur un même DVD+RW ?
> 4 ou 5 gravures consécutives sur DVD+RW différents ?
> As tu déjà procédé à un effacement complet de ton DVD+RW ?
> Fichiers sources différents ?

[daouid]

Grand merci pour t'occuper de mon cas Burnitall

Effectivement c'est a partir de 5 gravures sur le MEME DVD vierge!
A chaque fois ce ne sont que des vichiers VOB (ceux des film en DVd) que je grave
Si bien qu'a l'image il y a des arrets de lecture de la mosaique...
Du coup pour vérifier j'ai utilisé l'utilitere de nero qui examine l'état des DVD et il trouve énormement de secteur mauvais ou deffectueux !

En ce qui concerne l'effacement du dit DVD avec la méthode rapide cela fonctionne mais avec l'effacement long de Nero celui plante:il ne se passe rien comme ci il n'arrive pas à éffacer le DVD.Du coup je regrave par dessus le DVD et au début de la gravure avec Nero il me demande si je veux effacer le DVD et je dit oui,puis la gravure s'enchaine...

En fait j'ai l'impression que mon graveur bûle trop les DD si bien qu'aprés plusieurs gravure celui ci endommage les DVD réinscriptibles.

Par contre je t'avoue ne jamais avoir achetté des DVD- RW uniquement des +.Du coup je viens d'achetter des - et je vais faire l'éssaie mais je ne connaitrais le résultat que dans quelques semaines...

Voila si tu as d'autres questions...

[Burnitall]

Du coup je regrave par dessus le DVD et au début de la gravure avec Nero il me demande si je veux effacer le DVD et je dit oui,puis la gravure s'enchaine...

Ce qui correspond à un effacement rapide (TOC only).

T'exites pas les globules, si le problème n'est dû qu'à un seul et même DVD+RW, benne le ! Clairement si tu n'arrives pas à l'effacer complètement c'est qu'il a un prob. A toute fin utile vérifie l'état physique (salissure, trace de doigt etc) et tentes un effacement complet avec un autre logiciel. Il y a ce qu'il faut dans la rubrique téléchargement du site.